End User: Ocean AI Main Components: LabVIEW Contents: - Wind direction and speed information is collected from multiple angles using four wind vanes deployed on-site. This allows for real-time detection of localized gusts and irregular airflow changes, and prevents safety accidents on-site through accurate data-based work decision-making. - Real-time monitoring of brake operation and weighting of the eight axes, key to crane operation, is provided. This eliminates the risk of overload and maximizes equipment operation reliability. - All collected information (collected once per second per device) is transmitted in real time to a TCP server for centralized management. Beyond simple on-site monitoring, this system enhances transparency across the entire process and enables data-driven, smart on-site management.

Project Name: Projectile Velocity Measurement System End User: SNT Motiv Main Components: LabVIEW, cDAQ-9185, NI-9223, Velocity Measurement Sensor Description: This system measures the velocity of high-speed moving objects. It measures and logs the velocity of experimental specimens passing through two sensors.

Project Name: Reflective Wave Measurement and Analysis End User: Korea Institute of Electrical Research Key configurations: oscilloscope (Keysight EXR254A), network analyzer (Rohde & Schwarz ZNL4), function generator (Tektronix AFG31252), LabVIEW Contents: Tektronixs AFG 31252 function generator and Rohde&Schwarzs ZNL4 network analyzer are used to generate signals, Keysights EXR 254A oscilloscope and Rohde&Schwarzs ZNL4 network analyzer are used to measure signals, and then data of synchronized measured signals can be stored and analyzed with TDMS using LabVIEW and DIAdem. The LabVIEW-based PC program controls the signals of function generators and network analyzers, stores and reanalyzes data and graphs collected from oscilloscopes and network analyzers in real time, and stores and outputs data files in TDMS format.

Project Name: SNT MDPS Motor Assembly and Inspection End User: SNT MOTIV Key Configurations: Lenze Servo, METEK Motor Controller, MES, ODA, PCI 8513, RM3544, ST5520, IM3523, NI8452 Contents: It is an extension line of the MDPS motor line installed in the existing SNT MOTIV, press-fitting assembly using SERVO PRESS, magnetization and inspection of the rotor, assembly of the housing and rotor and cover, cogging, friction, insulation, inductance, counter electromotive force, torque, ripple torque, noise vibration, etc. are examined to determine whether the product is good or not. Data generated during each process is stored locally as an Excel file on the PC and stored in the MES server. After that, the defect rate and information can be checked by using the stored data.

Project Name: Heat exchanger HILS emulator End User: Gongju National University Main configuration: 2 servo motors, 1 servo drive (L7SA020B), 1 pump, 2 flow meters/thermometers (TM2-22RB)/pressure meters, 1 heater (PION-D3W), 1 3Way valve, LabVIEW Contents: The purpose is to continuously circulate the cooling water using the pump, adjust the temperature of the cooling water by heating it with a heater or cooling the pipe with two servomotors, and use the flow meter, thermometer, and pressure meter to receive real-time data of each location and use the value to reach the desired target temperature value.

Project Name: Smart Ship Simulation End User: Korean class Key components: PLC (XBM-DN32H), Positioning Module (XBF-PN04B), SERVO DRIVE (iX7NHA001U), SERVO MOTOR (APM-EA01AM3K), POWER SUPPLY (SPB-A015-24), CAN COMMUNICATION CARD (USB-8502), LabVIEW, XG5000, XG-PM Contents: Using two PCs, write a program with one Slave and the other with the Master, and exchange values using Modbus TCP and CAN communication. The Slave side only monitors and creates a program so that the Master can adjust the Servo Motor connected to the Slave side. To show security problems through packet theft and operation from the outside.

Project Name: Insulation Coolant Insulation Performance Test End User: Korea Maritime University Key components: conductivity sensor (SH-200RS), flow meter (KEYENCE FD-H), pressure meter (Autonomics PSAN), power supply (RIGOL DP813), LabVIEW Contents: In the cooling system, insulation coolant is circulated to the pump, DC 12V is spilled into the coolant using a power supply (RIGOL DP813), and the flow rate is continuously circulated using a flow meter (KEYENCE FD-H) and an automatics PSAN if the test specifications such as flow rate are met, and conductivity is measured using a conductivity sensor (SH-200RS). LabVIEW is used to control the system using all sensors and PLC, and to determine the operation and result of the acquired data.

Project Name: Ship Block Monitoring System End User: Ocean AI Main Components: LabVIEW Description: This program receives data in NMEA 0183 tag format from GNSS, IMU, and anemometers installed onboard the vessel, then generates a string according to the customers specifications. The generated data is stored locally and simultaneously transmitted to an external server via TCP communication. Furthermore, data reception and communication status are continuously monitored to ensure stable system operation. This allows for efficient management of various sensor data generated during vessel operation.

Project Name: Photosensor Image Acquisition System End User: Korea Institute of Materials Science Main Components: NI PCIe-6738, USB-6453, LabVIEW Details: Developed a system that collects and analyzes 32 channels of data based on voltage signals collected from a photosensor array using a PC, NI PCIe-6738, and USB-6453 devices. The system visualizes the data in the form of intensity graphs using LabVIEW, and includes the ability to save screenshots of the graphs.

Project Name: SNT India MDPS motor assembly and inspection End User: SNT MOTIV Key components: PLLAB motor controller HIOIKIST5520, HIOKI IM3523, NI 8512, LENZE SERVO, particle Contents: The line installed at SNT Indias Chennai plant is a steering motor used in MQ4 and SU2, which inspects SERVO PRESS assembly, magnetization, and inspection, rotor assembly, cogging, frelection, insulation, inductance, BACK EMF, torque, ripple torque, noise vibration, etc. and determines whether it is good or bad. The data generated during the assembly and inspection are stored in Excel on each PC, DB MES is stored in the main PC server, and the stored data can be inquired to prevent defective products from being shipped and check where and what kind of defective data is generated.

Project Name: IMEB3 Regenerative Braking Motor Assembly and Inspection End User: SNT MOTIV Main Components: PLLAB Motor Controller, HIOKI ST5520, KEYSIGHT LCR Meter, NI 8512 (CAN) Description: This project involves assembling regenerative braking motors for electric vehicles and inspecting various parameters such as cogging, friction, insulation, inductance, back EMF, torque, torque ripple, and noise/vibration. Based on these measurements, it determines whether the motor is a good product or defective. During the assembly and inspection process, all measurement data is saved in Excel format on each PC and then transmitted to the main servers MES database. The saved data can be reviewed to ensure defective products are not shipped. Furthermore, it enables tracing of where and why defects occur by analyzing the inspection results.

To replace the portable recorder used by Hyundai Electric, a new data collection and analysis program based on LabVIEW was developed. To solve problems with existing portable equipment that is difficult for workers to use due to aging or performance issues, a more intuitive UI and better data processing functions can be provided. You can measure the voltage of generators, circuit breakers, etc. to collect voltage data in the field, and you can check the filtered data, RMS, and peak by channel. There is also a data storage function and a function to check the stored data as a graph.

Project Name: B&B End User: ISL Instruments Key Configuration: LabVIEW 2020, ASM390 Content: : (Usage – TKF) (System Purpose – Test the performance of the valve using nitrogen and helium) It is an equipment that injects nitrogen and helium into the pipe to test whether the performance of the valve connected to the pipe is normal. In addition, the tested data can be checked on the web by sending a report in conjunction with the RAM server, and the report can be checked in the inspection system itself.

Project Name: Large Outdoor Noise Inspection System End User: LG Electronics Equipment used: LabVIEW, NI-9425, SeeSV-S206W, GMES Contents: This project uses SMIs SeeSV-S206W sound camera to inspect the abnormal noise of large outdoor unit production products and link the result of judgment to the MES. Up to three areas of interest desired by the user

Project Name: Multi-axis Control Acoustic Collection System End User: Pohang University of Technology Equipment used: LabVIEW, MD200T 2CH Motor Driver, 30W BLDC Motor, SR785 Dynamic Signal Analyzer Contents: This project controls the multi-axis motor and moves step by step to the mm position desired by the user to perform automatic SR785 signal analyzer measurement. Location information can be saved as a file and reloaded and reused, and Raw Data of the SR785 signal analyzer can be automatically logged.

Project Name: 4-axis control sound collection system End User: Pusan National University Equipment used: LabVIEW, MD200T 2CH Motor Driver, 30W BLDC Motor Contents: The project is to control the 4-axis motor and perform automatic SR785 signal analyzer measurement by moving steps to the desired mm position. Location information can be saved as a file and reloaded and reused.

Project Name: Battery Cell Charge/discharge test Equipment used: Power Supply(IDRC DSP-006-100HR), Electronic Load(PRODIGIT MainFrame 3300G, Module 3316G), DAQ(Keysight 970A), DMM(Keysight DMM 34461A), RelaySwitch, ThermoCouple, LabVIEW Contents: Test equipment capable of creating and executing any sequence for the Cell charge/discharge test. The sequence is mainly in the form of repeated charge-discharge, and can be completed or moved to a specific step when the condition specified in the step occurs.

Project Name: FE, HR Motor Housing Assembly-Car End User: SNT MOTIV Equipment used: Atlas Copco Power Focus, Mitsubishi PLC, LabVIEW, ODBC MES

Project Name: FIVA Hydraulic Pump Test End User: Goltens Equipment used: cDAQ 9189, NI (9208, 9215, 9265, 9426, 9476, 9485) Contents: Hydraulic PID is controlled to receive flow rate and pressure values for FI position and VA position, separate inspection standard values for each model are stored and applied. Data from the test are collected, recorded in the test report, and output.

Project Name: Raper Spring Durability Test End User: SNT MOTIV Equipment used: Heisen Servo, LoadCell, LabVIEW Contents: A durability test for controlling servo to stretch and compress the spring at high speed and how many times it will break and how many times it will last