Project Name: FIVA Hydraulic Pump Test

End User: Goltens

Equipment used: cDAQ 9189, NI (9208, 9215, 9265, 9426, 9476, 9485)

Contents: Hydraulic PID is controlled to receive flow rate and pressure values for FI position and VA position, separate inspection standard values for each model are stored and applied. Data from the test are collected, recorded in the test report, and output.

Project Name: Raper Spring Durability Test

End User: SNT MOTIV

Equipment used: Heisen Servo, LoadCell, LabVIEW

Contents: A durability test for controlling servo to stretch and compress the spring at high speed and how many times it will break and how many times it will last

Project Name: Damping Force Checker

End User: SNT MOTIV

Equipment used: Lenze Servo, LoadCell, LabVIEW

Contents: If the damper injected with gas is repeatedly compressed and expanded a certain number of times, the repulsive force is generated to push it by the force of the gas. The data generated through these tests are obtained, passed and failed, and the data is drawn in a circle

Project Name: View type production line

End User: SNT Motiv

Equipment used: RIGOL DG812 functional generator, HIOKI 3153 insulated withstand voltage, RM3544 ohmmeter, Lenze servo press

Contents: This is SNT Motiv's production line production project. Automate the production line process and conduct product performance inspection through various measuring instruments. Log the process and inspection results and determine whether they are good or bad.

Project Name: BMA SV Line Performance Inspection

End User: SLB (Ceroblithium Battery)

Equipment used: HIOKI BT3562, HIOKI ST5520, KEYSIGHT DAQ970a, CHROMA 19053, PSBE10060-510, CT-100G

Contents: This project is to inspect the performance of the BMA SV line production products of cubic lithium batteries. Product electrical characteristics and performance tests are conducted through various measuring instruments, the results are logged, and the inspection results are delivered by communicating with the control PC.

Project Name:HILS SYSTEM CORRECTION

End User: Korean advance

Equipment used: PXIe-1095, PXIe-8881

Contents: This is the work of modifying the HILS system to verify the integrated control system for electric composite propulsion ships. As the system verification method was changed from H/W Wiring to verification through Modbus communication, the communication connection, variable setting, and operation sequence required for verification were modified.

Project Name:Specification Vision
End User: DaemyungTS

Equipment used: Basler acA2500-14 gm *6, PCI-1730 DIO

Contents: This is a project to photograph samples through 6 cameras and check the peculiarities of various products to check whether the product is correct. On-site setup and inspection stabilization of the project were carried out.

Project Name:Circular BPR Vision Inspection

End User: DaemyungTS

Equipment used: USB-6001 DAQ, Basler-acA2500-14 gc Camera

Contents: This is a project that photographs the sealer application state of the sample with a camera and determines the condition. Check the sealer application state, and display the defective application state location on the screen to notify the user. It is also possible to manage the history of inspection results.

Project Name:SCV200_Sound&VibrationDataLogger

End User: HD Modern Site Solution

Equipment used: Mini Netbook, cDAQ-9171, NI-9231

Contents: This is a project to manufacture ultra-small measuring equipment that can easily measure and store noise & vibration data. It can collect up to 8 channels simultaneously and store up to 1 minute. A Weight Filter and BandPass Filter can be applied and FFT conversion is supported.

Project Name:A2L (XCP) communication

End User: Bevasto Korea

Equipment used: LabVIEW, USB-8502

Contents: The vehicle battery BSA and XCP communication measure the voltage when charging and the voltage when discharging to determine the state of the BSA.

Project Name:E-SHIFTER TEST SYSTEM

End User: SL (SL)

Equipment used: LabVIEW & Keysight N5705C

Contents: Project Description/Function of Equipment _ Using a Keysight N5705C power analyzer, check the vehicle E-SHIFTER that controls time, voltage, etc. by outputting them as waveforms and stores the result values. Create faster inspection equipment by manufacturing Keysight BV9201B PathWave BenchVue Advanced Power Control and Analysis S/W replacement and customer-specific TEST equipment for annual subscription.

Project Name:USRP SDR RF Receiver System

End User: National Radio Research Institute

Equipment used: LabVIEW & NI USRP-2940R, 120MHz BW, 50 MHz TO 2.2 GHz SDR

Contents: Processing unit to receive wirelessly radiated monitor signal (VESA standard). Receive and store all low data of the frequency set using NI USRP and LabVIEW.

Project Name: Total Thermal Calibration

End User: SNT MOTIV

Equipment used: LabVIEW, PLC, Servo Press, Lenze

Contents: Measure the LVDT value before advancing to the press and the LVDT value of the total column after advancing to the press, drop the PIN, and if it is normal, correct it by the error value from the advanced PRESS and continue to advance the total column to correct the angle.

Project Name: Nozzle Test

End User: Hanjin Industrial Co., Ltd

Equipment used: Sol V/V, Professional V/V, LabVIEW, Flowmeter

Contents: Hydraulic pressure must be compressed with a press, injected through the nozzle at a set pressure, and pressure must be maintained at the set value and reached within a few seconds until the target flow rate flows to determine it as a normal product.

Project Name: Vibration Transmissibility System

End User: ECO Convergence Fiber Researcher

Equipment used: LabVIEW, cDAQ-9185, NI-9234, NI-9237, NI-9263, 3-axis acceleration sensor, 1-axis acceleration sensor, strain gauge-based load cell, vibrator

Content: Test the delivery rate of dustproof gloves based on a 1/3 octave analysis. For testing, a vibrator control signal is generated, and grip and transfer forces are checked. Repeat the test, save it as a file, load it from the analysis screen, and compare the delivery rate.

Project Name: AE Non-Destructive Testing

End User: Korea Machine Inspection Institute ENC

Equipment used: LabVIEW, cDAQ-9189, NI-9223, AE sensor

Content: The purpose is to detect cracks, breakdowns, etc. in containers in a pressurized environment through AE sensor data. AE sensor data can be stored and retrieved to perform exponential fitting, peak detection, and STFT for each channel. Exceptions can be applied to some processes, such as FIR filters, while being stored with AE sensor data by designating a pressure sensor channels