Project Name: HTS_Sub TEST 

End User: S&T Motiv

사용장비: LabVIEW, Atraskopco PLC (LS Industry)

내용장비: Decompression test and bolt torque measurements are displayed in the UI to confirm with the operator.

Project Name: Torque Test

End User: Bosch Rexroth

사용장비: LabVIEW, PLC, OPC LabVIEW Inrtalogics, Bosch Intralogics

내용: It is a program that measures torque, stroke, and RPM of motors on the 1st, 2nd, and 3rd axes and prepares a report along with the corresponding graph.

Project Name: Adding a Sheet Heterogeneous Inspector Model

End User: Hyundai Motor Sheet 3 Factory

사용장비: LabVIEW

내용: It is a project to add new equipment for sheet heterogeneous inspection machines operating at Hyundai Motor's Sheet 3 plant, and to recalibrate vision inspection points due to transfer work.

Project Name: Acoustic Transmission Test Bench

End User: Korea Maritime University

사용장비: LabVIEW, PXIe-1082, PXIe-8840, PXIe-5433 AWG, PXIe-5172 Oscilloscope

내용: A system that outputs acoustic signals made from wav files or Matlab underwater and measures the signals in oscilloscope. It can output signals up to 80 MHz and process signals up to 250 MHz per second.

Project Name: UVC LED Module Tester for Water Purifier

End User: Shin Sung Delta Tech (LG Electronics)

사용장비: LabVIEW, RS-232 Serial, USHIO UIT-250 UV meter

내용: UVC LED Module is a device that communicates with UIT-250 equipment to measure light intensity, and stores sum/disjudgment and measurement results.

Project Name: HTS Line

End User: S&T Motiv

사용장비: LabVIEW, LS XGT PLC, Lenze Servo, ATEQ F620 Leak Tester, OMRON Vision

내용: S&T Motiv's HTS production line is a project to manually and automatically manipulate equipment for Housing Sub, GearSet ASY, Cover Fastening, and Piston ASY process equipment, count the number of products produced, and determine quantity.

Project Name: Thermohygrometer Monitoring System

End User: Ulsan University Marine Engineering Tank

사용장비: LabVIEW, KIMOCA-310

내용: CA-310 transmitte equipment and Modbus Ethernet communication display and log data from temperature and humidity sensors connected to the equipment. Data is stored as an Excel file, and data trends in the range of up to 24 hours can be seen at a glance.

Project Name: Water Level Sensor Frequency Measuring Device

End User: LG Electronics

사용장비: LabVIEW, cDAQ-9184, NI 9411, NI 9478, NI 9215

내용: It is a device that analyzes frequency data of washing machine's water level sensor due to changes in water level and determines whether a product is valid or not. Precisely control the water level through servo motor control. In addition to regular Top Loader and Front Loader products, random testing and analysis are possible.

Project Name: Hydrogen Station Monitoring System

End User: Hyundai Motor Co.

사용장비: OPC communication, NI-Xnet

내용: Hydrogen charge monitoring and control system Pressure and reservoir valve control through communication with vehicle

Project Name: Pattern Processing System

End User: Zetec

사용장비 : LabVIEW, USB-DAQ

내용 : A system that prints arbitrary patterns to process patterns on film

Project Name : 2D Image 3D Visual

End User : UNIST

사용장비 : LabVIEW, THORLABS DCC3260C

내용 : Real-time representation of brightness information in 3D based on images acquired from cameras. Acquire and set up camera images based on Dot NET.

Project Name: Partial Discharge System

End User : Korea Electrical Research Institute

사용장비 : LabVIEW, NI PXIe-6355, NI PXIe-5160

내용 : Using analog triggering function, only high-speed signal acquisition of one period of 60 Hz sine wave is performed, and data collection is made at any desired repeat point. Memory management is required because it requires long repetition. The same functionality is implemented with DAQ equipment and Scope equipment.