Project Name: Cluster Inspection Equipment

End User: S&T Motive

사용장비 : LabVIEW, NXnet, Camera

내용 : Cluster performance inspection equipment via vision and CAN

Project Name: Driving Environment Monitoring System

End User: Busan Transportation Corporation

사용장비 : LabVIEW, FPGA, Real-Time, sbRIO

내용 : A system for real-time analysis of road data measured by the accelerometer to the control center.

Project Name: Smart Factory Monitoring Tracking

End User : Korea Shoe Leather Research Institute

사용장비 : No HW

내용 : Using LabVIEW, NI System Link, DB, and Server PC, share information related to production to each distributed process PC and establish a production history management system.

Project Name: Weather Logger System

End User: Shinmyung Electronics (Nuclear Environment Corporation)

사용장비 : cRIO-9030 2EA, cRIO-9063 3EA

내용 : Digitalize the signals of wind direction, wind speed, and temperature sensors from three cRIO-9063s and transmit data to two cRIO-9030s every second through serial communication. cRIO-9030 stores and delivers average data every minute. Synchronize by sharing the data if the storage data for each cRIO-9030 is different.

Project Name: Radiation Measurement Program

End User : Dongseo University

사용장비: cRIO-9045, NI 9775 3 EA

내용 : Measurement by changing the radiation emitted by the device from the sensor to the voltage. Apply trigger algorithm by measuring voltage at a rate of 20MS/s on the FPGA.

Project Name: LED Dimension Inspection

End User : Deoksan Neolux

사용장비 : LabVIEW, LabVIEW Vision Development Module

내용 : After storing pictures taken with microscopes in the folder by type in advance, measure the dimensions of LEDs by image processing and automate the average and standard deviation calculations.

Project Name : 2D Image 3D Visual

End User : UNIST

사용장비 : LabVIEW, THORLABS DCC3260C

내용 : Real-time representation of brightness information in 3D based on images acquired from cameras. Acquire and set up camera images based on Dot NET.

Project Name: Partial Discharge System

End User : Korea Electrical Research Institute

사용장비 : LabVIEW, NI PXIe-6355, NI PXIe-5160

내용 : Using analog triggering function, only high-speed signal acquisition of one period of 60 Hz sine wave is performed, and data collection is made at any desired repeat point. Memory management is required because it requires long repetition. The same functionality is implemented with DAQ equipment and Scope equipment.

Project Name: MMC HVDC Power Conversion System Monitoring

End User : KEPCO

사용장비 : LabVIEW, LabVIEW FPGA, LabVIEW RT, cRIO-9030 4EA, NI 9871 16EA

내용 : Data from each Master and Slave board for power conversion control is collected from cRIO via EtherCAT and RS-485 communication. Each cRIO delivers data to a monitoring PC via Ethernet communication. High speed RS-485 communication transfers voltage and current graphs of each Slave board.

Project Name: Large Ship High Pressure Loger

End User : TSP

사용장비 : LabVIEW, cDAQ-9184, NI 9205, NI 9219, NI 9237, DTS_KS-SIL2_05-201

내용 : Improve portability by making data collectors box-shaped. Measure the current signal from the high pressure pressure sensor and monitor and record the pressure status of each location for a long time.

Project Name : PAS System

End User : Korea Electrical Research Institute

사용장비 : LabVIEW, NI PXIe-8821, NI PXIe-1071, NI PXIe-6355, NI PXIe-6738

내용 : Outputs and inputs a voltage of a specific frequency in a space filled with a particular gas to measure the phase difference. Synchronization of voltage outputs and inputs for precise phase measurements.

Project Name : TCU TEST

End User : Korea Railroad Corporation

사용장비 : cDAQ-9178, NI 9205, NI 9203, NI 9268

내용 : Main Power Transducer Operation Test Program for Electric locomotives of 8500 units. To determine if there is no problem with the operation by feedbacking the signal output of the main power transducer under certain conditions.

Project Name: Vehicle Crack Inspection

End User : Hyundai Motor Company

사용장비 : NI Vision Assistant, Basler acA640-90gc

Contents: Automatically inspect the production of press products with industrial cameras for cracks.

Project Name: Thermal Image Vision

End User : Taekwang

사용장비 : LabVIEW, LS Industrial PLC, FLIR AX8 2 units

내용 : Measure the temperature of the shoes that are aged at each location on the first and second floors with a thermal camera equipped with the oven used in the shoe manufacturing process is equipped with two thermal imaging cameras. Take a picture of the actual image of the product, find the location of the product through video processing, and measure the temperature of the desired location from the thermal image. Temperature control so that the average measured temperature can be passed to the PLC to meet the target temperature.

Project Name: Speech Recognition

End User : UNIST

사용장비 : LabVIEW, : cDAQ-9171, NI 9234, Industrial microphone

내용 : Record the words you want in advance, save them, and compare them to the files you recorded in advance when you talk about the same words later. For each acoustic information, analyze the frequency to calculate the probability of matching the same person.

Project Name: I.P Vision Inspector

End User : Hwaseung and Sungshin

사용장비 : LabVIEW, NI USB-6525, Basler acA2000-50gc, Basler acA640-300gc, Bar LED, Ring LED

내용 : Midsole is taken with an industrial camera to examine the width and length of the product. Five circles are engraved inside the product, and the coordinates of the circle are found through video processing and the product is measured.

Project Name: Position Determination and Guide Vision

End User : Far East Machine

사용장비 : LabVIEW, LS Industrial PLC, Balser acA800-510uc, Ring LED

내용 : Industrial cameras are installed on Torast equipment to provide background images and projected images of shoes to be produced. The location of the shoes is determined to prevent production if the shoes are out of the pre-set position.