Project Name: Large Outdoor Noise Inspection Syste
Project Name: Large Outdoor Noise Inspection System
End User: LG Electronics
Equipment used: LabVIEW, NI-9425, SeeSV-S206W, GMES
Contents: This project uses SMIs SeeSV-S206W sound camera to inspect the abnormal noise of large outdoor unit production products and link the result of judgment to the MES. Up to three areas of interest desired by the user
Multi-axis Control Acoustic Collection System - El
Project Name: Multi-axis Control Acoustic Collection System
End User: Pohang University of Technology
Equipment used: LabVIEW, MD200T 2CH Motor Driver, 30W BLDC Motor, SR785 Dynamic Signal Analyzer
Contents: This project controls the multi-axis motor and moves step by step to the mm position desired by the user to perform automatic SR785 signal analyzer measurement. Location information can be saved as a file and reloaded and reused, and Raw Data of the SR785 signal analyzer can be automatically logged.
4-axis control sound collection system - Electric
Project Name: 4-axis control sound collection system
End User: Pusan National University
Equipment used: LabVIEW, MD200T 2CH Motor Driver, 30W BLDC Motor
Contents: The project is to control the 4-axis motor and perform automatic SR785 signal analyzer measurement by moving steps to the desired mm position. Location information can be saved as a file and reloaded and reused.
Battery Cell Charge/discharge test - Electrical &
Project Name: Battery Cell Charge/discharge test
Equipment used: Power Supply(IDRC DSP-006-100HR), Electronic Load(PRODIGIT MainFrame 3300G, Module 3316G), DAQ(Keysight 970A), DMM(Keysight DMM 34461A), RelaySwitch, ThermoCouple, LabVIEW
Contents: Test equipment capable of creating and executing any sequence for the Cell charge/discharge test. The sequence is mainly in the form of repeated charge-discharge, and can be completed or moved to a specific step when the condition specified in the step occurs.
FE, HR Motor Housing Assembly-Car
Project Name: FE, HR Motor Housing Assembly-Car
End User: SNT MOTIV
Equipment used: Atlas Copco Power Focus, Mitsubishi PLC, LabVIEW, ODBC MES
내용: OS, FE, and HR can be assembled in a single line through the assembly process of motors and housings used in FE, HRs Nexo, and Porter, and MES DB management is performed on all process data results.
Work and data management for a number of functions, including loading, magnetization, silicone application, bolt fastening, confidentiality inspection, performance inspection, laser angle, etc.
FIVA Hydraulic Pump Test - Vessel & Heavy Indu
Project Name: FIVA Hydraulic Pump Test
End User: Goltens
Equipment used: cDAQ 9189, NI (9208, 9215, 9265, 9426, 9476, 9485)
Contents: Hydraulic PID is controlled to receive flow rate and pressure values for FI position and VA position, separate inspection standard values for each model are stored and applied. Data from the test are collected, recorded in the test report, and output.
Raper Spring Durability Test - others
Project Name: Raper Spring Durability Test
End User: SNT MOTIV
Equipment used: Heisen Servo, LoadCell, LabVIEW
Contents: A durability test for controlling servo to stretch and compress the spring at high speed and how many times it will break and how many times it will last
Damping Force Checker - Car
Project Name: Damping Force Checker
End User: SNT MOTIV
Equipment used: Lenze Servo, LoadCell, LabVIEW
Contents: If the damper injected with gas is repeatedly compressed and expanded a certain number of times, the repulsive force is generated to push it by the force of the gas. The data generated through these tests are obtained, passed and failed, and the data is drawn in a circle
View type production line - Car
Project Name: View type production line
End User: SNT Motiv
Equipment used: RIGOL DG812 functional generator, HIOKI 3153 insulated withstand voltage, RM3544 ohmmeter, Lenze servo press
Contents: This is SNT Motiv
BMA SV Line Performance Inspection - Car
Project Name: BMA SV Line Performance Inspection
End User: SLB (Ceroblithium Battery)
Equipment used: HIOKI BT3562, HIOKI ST5520, KEYSIGHT DAQ970a, CHROMA 19053, PSBE10060-510, CT-100G
Contents: This project is to inspect the performance of the BMA SV line production products of cubic lithium batteries. Product electrical characteristics and performance tests are conducted through various measuring instruments, the results are logged, and the inspection results are delivered by communicating with the control PC.
HILS SYSTEM CORRECTION - ELECTRIC & ELECTRONIC
Project Name:HILS SYSTEM CORRECTION
End User: Korean advance
Equipment used: PXIe-1095, PXIe-8881
Contents: This is the work of modifying the HILS system to verify the integrated control system for electric composite propulsion ships. As the system verification method was changed from H/W Wiring to verification through Modbus communication, the communication connection, variable setting, and operation sequence required for verification were modified.
Specification Vision - Automobiles
Project Name:Specification Vision
End User: DaemyungTS
Equipment used: Basler acA2500-14 gm *6, PCI-1730 DIO
Contents: This is a project to photograph samples through 6 cameras and check the peculiarities of various products to check whether the product is correct. On-site setup and inspection stabilization of the project were carried out.
Circular BPR Vision Inspection - Electrical &
Project Name:Circular BPR Vision Inspection
End User: DaemyungTS
Equipment used: USB-6001 DAQ, Basler-acA2500-14 gc Camera
Contents: This is a project that photographs the sealer application state of the sample with a camera and determines the condition. Check the sealer application state, and display the defective application state location on the screen to notify the user. It is also possible to manage the history of inspection results.
SCV200 - Electrical & Electronic
Project Name:SCV200_Sound&VibrationDataLogger
End User: HD Modern Site Solution
Equipment used: Mini Netbook, cDAQ-9171, NI-9231
Contents: This is a project to manufacture ultra-small measuring equipment that can easily measure and store noise & vibration data. It can collect up to 8 channels simultaneously and store up to 1 minute. A Weight Filter and BandPass Filter can be applied and FFT conversion is supported.
A2L (XCP) communication - CAR
Project Name:A2L (XCP) communication
End User: Bevasto Korea
Equipment used: LabVIEW, USB-8502
Contents: The vehicle battery BSA and XCP communication measure the voltage when charging and the voltage when discharging to determine the state of the BSA.
E-SHIFTER TEST SYSTEM - AUTOMOBILE
Project Name:E-SHIFTER TEST SYSTEM
End User: SL (SL)
Equipment used: LabVIEW & Keysight N5705C
Contents: Project Description/Function of Equipment _ Using a Keysight N5705C power analyzer, check the vehicle E-SHIFTER that controls time, voltage, etc. by outputting them as waveforms and stores the result values. Create faster inspection equipment by manufacturing Keysight BV9201B PathWave BenchVue Advanced Power Control and Analysis S/W replacement and customer-specific TEST equipment for annual subscription.
USRP SDR RF Receiver System - Electrical & Ele
Project Name:USRP SDR RF Receiver System
End User: National Radio Research Institute
Equipment used: LabVIEW & NI USRP-2940R, 120MHz BW, 50 MHz TO 2.2 GHz SDR
Contents: Processing unit to receive wirelessly radiated monitor signal (VESA standard). Receive and store all low data of the frequency set using NI USRP and LabVIEW.
Nozzle Test - Shipbuilding & Heavy Industries
Project Name: Nozzle Test
End User: Hanjin Industrial Co., Ltd
Equipment used: Sol V/V, Professional V/V, LabVIEW, Flowmeter
Contents: Hydraulic pressure must be compressed with a press, injected through the nozzle at a set pressure, and pressure must be maintained at the set value and reached within a few seconds until the target flow rate flows to determine it as a normal product.
Vibration Transmissibility System - Ele
Project Name: Vibration Transmissibility System
End User: ECO Convergence Fiber Researcher
Equipment used: LabVIEW, cDAQ-9185, NI-9234, NI-9237, NI-9263, 3-axis acceleration sensor, 1-axis acceleration sensor, strain gauge-based load cell, vibrator
Content: Test the delivery rate of dustproof gloves based on a 1/3 octave analysis. For testing, a vibrator control signal is generated, and grip and transfer forces are checked. Repeat the test, save it as a file, load it from the analysis screen, and compare the delivery rate.